|
List Price: $8.22
Our Price: $7.78
Your Save: $ 0.44 ( 5% )
Availability: Usually ships in 24 hours
Manufacturer: Bosch
|
Average Customer Rating:  
|
|
Binding: Tools & Hardware
Brand: Bosch
EAN: 0000346313321
Feature: For precision cuts at 90¿, reduces kerf clearance to thickness of blade.
Label: Bosch
Manufacturer: Bosch
Model: TS1005
Publisher: Bosch
Studio: Bosch
|
|
|
Features
|
For precision cuts at 90¿, reduces kerf clearance to thickness of blade.
Supports the workpiece closer to blade for less chip-out and splintering
Reduces kerf clearance to the thickness of your blade
Keeps blade clean by stopping sawdust from falling into the throat
|
|
|
|
|
|
|
|
|
Editorial Reviews:
|
For precision cuts at 90-Deg., reduces kerf clearance to thickness of blade. - Specifications: Part Number: TS1005, Used on Model No. : 4000, Sales Pack Quantity: 1.
|
|
|
Spotlight customer reviews:
|
Customer Rating:
Summary: Bosch Insert
Comment: This insert works ok but it does flex. If you are at the end of a board and cutting say a rabbet (where you don't cut all the way through the board) and you don't have the table on both sides of the insert to support the board when you press down the insert will deflect down and cause you to cut alittle deeper. Other than that it works ok.
Customer Rating:
Summary: Works okay - recommended
Comment: I dunno what the complainers are griping about. When installed and adjusted properly, the insert does exactly what it's supposed to do, namely minimizing tearout and stopping thin trimmings dropping down into the motor works.
Customer Rating:
Summary: Clean cut
Comment: After having problems from plywood veneers "chipping" @ the cut edge, purchased this unit - it solved the problem!
Customer Rating:
Summary: Too flimsy...
Comment: This was a waste of money. The plastic it's made from is cheap and flimsy. If you put any downward pressure on your material as you push it through the saw the insert deflects and your material gets caught on the lip between the table and the insert. Threw it right in the garbage and made my own from Baltic birch plywood.
Customer Rating:
Summary: Works fine!
Comment: This zero clearance insert works fine. Earlier reviews said it was cheap and flimsey but it seems to do the job for me. I think some people get so obsessed with ultimate perfection that they loose site of the overall picture.
|
|
|
|
|
|
